b-prisma-poly-flachdach.gsm
An article by
b-prisma
Category
2D-Elements
Release Notes
Version 6.1
14.07.2026
✨ New:
- Up to 20 low points instead of four — and correspondingly many drains per roof (General tab, “Number of lows”)
- LES tapered insulation fully integrated: wedge rows now follow the polygonal roof outline and are trimmed there, including at curved edges (LES tab)
🔧 Improved:
- Label: the update check always reported an outdated version — it now sends the actual object version
- Label: typo in the dialog title corrected
🐛 Fixed:
- Favourites export overwrote an existing set name before the prompt appeared — writing now happens only after the overwrite is confirmed (Skins tab → … Favourites)
- Favourites export reported “set name already exists” after every save, even for a new name — the message now appears only on a real name conflict
- Elevation markers at the intersections of ridge or valley with the outer edge showed a stale value — now the actual roof surface height
- Second marker set: the “Symbol size” field had no effect and the filled marker used the pen of the first set — both fixed (2D tab → … Elevation Markers 2)
Version 5.9
22.06.2026
No release notes available.
Version 5.7
12.03.2026
No release notes available.
Version 5.6
20.07.2025
No release notes available.
Version 5.5
21.05.2025
No release notes available.
Version 5.4
17.05.2025
No release notes available.
Version 5.1
12.02.2025
New:
- - Missing Parameters added
- - Missing translations added
Version 5.0
11.01.2025
No release notes available.
Version 4.9
31.10.2024
No release notes available.
Version 4.8
31.10.2024
No release notes available.
Version 4.7
25.10.2024
No release notes available.
Version 4.6
24.10.2024
No release notes available.
Version 4.5
05.04.2024
No release notes available.
Version 4.4
05.04.2024
New:
- - Layers above the LES correctly cut
Version 4.3
04.04.2024
No release notes available.
Version 4.0
12.03.2024
New:
- - 2-sided slope possible
- - Bauder LES as an expert function
Version 3.9
20.12.2022
No release notes available.
Version 3.8
14.12.2022
No release notes available.
Version 3.7
14.12.2022
New:
- - Object lower edge as additional height reference point
- - Listing of the number of skins, layer thicknesses, building materials, area and content
- - Conversion of the export destination from "Path" to "Library
Version 3.6
13.12.2022
New:
- - minor corrections
Version 3.5
10.12.2022
New:
- - Slope arrows correctly readable for roof type "same Wall Connection height"
- - Elevation markers optionally at all corners for "same Wall Connection height".
- - Drainage zone optionally circular for "same Wall Connection height".
Version 3.4
10.12.2022
New:
- - Rotation axis water guide rotated by 45°
- - Saving of setting sets for the Skin layers and loading them in again
Version 3.3
06.12.2022
New:
- - Structure Display for wall connection
- - All texts that are off in the model representation are also off in 2D
- - Splitting objects in DE and EN and calling main object as macro
- - 2D fill adjustable in model view options
Version 3.2
30.11.2022
New:
- - minor corrections
- - Offset of the individual layer inwards possible (step 1: only for non-curved polygons)
Version 3.1
29.11.2022
New:
- - Structure Display integrated in 3D
- - Rotation of the drainage planes around a gully in 2D with drag point
- - Arrows did not rotate with this rotation
- - Automatic language retrieval via image file
Version 3.0
28.11.2022
New:
- - Elevation Markers: Hotspots and adjustments
- - Layer height calculation corrected
Version 2.9
27.11.2022
New:
- Parameters and UI page created for height markers
- Only type "Wallconnection at same height"
- - Elevation contours 2D created High points and drains
- - Optional specification of edge height or minimum slope
Version 2.8
26.11.2022
New:
- - Rounding off for Wall Connection at the same height
Version 2.7
26.11.2022
New:
- - Slope arrows for uniform Wall Connection heights
- - Rotation of the slopes around the drain points possible
Version 2.6
25.11.2022
New:
- - Beta version for wall connections at uniform height
- - Overlapping of UI outfields on UI infields removed
- - Texture origin always accessible
- - 3D artefacts removed when wall connection is switched on
Version 2.5
23.11.2022
New:
- - Optimisations
Version 2.4
21.11.2022
New:
- - HOTLINES in 2D at the single tile edges
- - Installation of openings in the flat roof surface
- - Wall connections for breakthroughs
- - Area calculation: deduction of breakthroughs taken into account
Version 2.3
21.11.2022
New:
- - Throat edges Water routing optionally visible in 2D under the covering
Version 2.2
19.11.2022
New:
- Minor optimisations
Version 2.1
18.11.2022
New:
- - Performance optimisations in 2D
Version 2.0
17.11.2022
New:
- - further entries model view option
- - Elimination of minor errors
Version 1.9
17.11.2022
New:
- - Further entries Model View Options
- - Translation to "en" complete
Version 1.8
16.11.2022
New:
- - Creation of the levels of geometry: 4 different display variants each for 2D, 3D and sections/views (LOG).
- - Optional control of the LOGs via a model view option object
Version 1.7
15.11.2022
New:
- - Adaptation emergency drain
- - Adaptation wall connection trimming
- - Translation to "en
Version 1.6
15.11.2022
New:
- Adaptation of the following points to multi-drains:
- - Drain points
- - Wall connections
- - User interface
Version 1.5
14.11.2022
New:
- Possibility to now place 1 - 4 drain points at any position.
Version 1.4
07.11.2022
New:
- - Installation of an optional parapet emergency overflow in the area of the wall connection
Version 1.3
07.11.2022
New:
- - minor improvements, bugs
Version 1.2
05.11.2022
New:
- - Small improvements
- - Update manual
- - Update video
Version 1.1
05.11.2022
New:
- - Openings Wall connection, e.g. for patio doors
Version 1.0
04.11.2022
New:
- - New function: Wall connection
- a) as a cuboid
- b) as profile from Profile Manager
Version 0.9
31.10.2022
New:
- - all graphics embedded
- - UI tooltips added
- - Position and number of individual plates corrected during rotation
- - Test UI on Windows
Version 0.8
30.10.2022
New:
- - Pruning routine optimised
- - Gully scaling
- - Texture shift and rotation
Version 0.7
29.10.2022
New:
- - Installation of slope arrows
- - Installation of single slabs
- - Various optimisations
Version 0.6
28.10.2022
New:
- - Installation of an Alwitra roof gully
Version 0.5
28.10.2022
New:
- - Completion of arc polygons in 2D and 3D
Version 0.4
26.10.2022
New:
- - Order of layers in the user interface changed to from bottom to top.
Version 0.3
26.10.2022
New:
- - Object created from previous versions
- - User interface made clearer
- - 3D layers cropped instead of SPRISM_.
Version
No release notes available.
Update Request
Privacy
- Personal data is not stored in this version query, unless you order an update and agree to the storage (see below)
- Conclusions about your person are not possible, unless you order an update and agree to the storage (see below); your IP address is stored after closing this page exclusively completely anonymised in our traffic evaluation (IP 11.22.33.44 becomes 0.0.0.0)
- This version query is primarily for your information; evaluations (except for the anonymised traffic evaluation) are not carried out by our side.
- Only the following data is transferred from the GDL object to the website during this version query: File name of the GDL object, version number of the GDL object and, if applicable, the language version set in the object (if available).
- This page sets one technically necessary session cookie that protects the form against abusive submission. It is deleted when you close your browser. No tracking of your behaviour takes place.
- When you request an update, we store all the data you enter in the form fields, provided you agree to this storage. If you do not agree, we delete all data in connection with the update request immediately after sending the email to you with the update